SteameryCirrus X Steamer Onyx

Cirrus X Handheld Steamer

Discover the Cirrus X Handheld Steamer, a handheld steamer designed to bring out the best in your wardrobe. Powerful performance, new features, three colors available.

Removes wrinkles and folds

The steam from your steamer instantly removes wrinkles and makes your clothes fresh again.

Gentle on all textiles

Can be used on most clothes and home textiles, even those too delicate to iron.

A good alternative to laundry

Removes unwanted odors and kills bacteria, making it a quick and easy way to refresh your clothes between washes.

Front plate in stainless steel

Equipped with a stainless steel front plate, specially developed to remove wrinkles effectively.

Limestone traps

To extend the shelf life, the steamer is equipped with scale traps that minimize the risk of it scaling again.

Power button

The on/off button makes it possible to turn off your steamer and at the same time leave it connected to the power outlet

Steam button

Equipped with a steam button that controls the release of steam. By controlling the amount of steam, the water in the water tank lasts longer.

Visible water tank

The 85 ml water tank is visible and designed so you can easily see the water level and more easily know when it's time to top up with water.

Hanging loop

Equipped with a loop for easy hanging on a hook or hanger.

Easy to take with you

A great travel accessory that keeps your clothes wrinkle-free and fresh when you have a limited wardrobe.

Steaming Pad included

Use the included Steaming Pad to press the fabric against the steamer when steaming. This tool is perfect for details like collars, cuffs and pockets.

Specifications

Country of manufacture: China

Model: Cirrus X Handheld Steamer Material: PP plastic

Importer: Steamery AB

Power: 1200 W

Weight: 750 g


Power cable: 2 m (US: 2.4 m)

Water tank: 85 ml

Steam capacity: 18-20 g/min

Start-up time: 20 seconds

Colors: Onyx, Lilac, Cotton "

Use:
Preparations
1. Remove the magnetically attached water tank by pulling it towards you.
2. Gently lift the silicone plug on top of the water tank and fill it with water.
3. Close the water tank with the silicone plug and put the water tank back in the
steamer.

Operating instructions
1. Plug the cord into a power outlet, then press the on/off switch.
2. Wait for 20 seconds. As soon as the red light turns white, the steamer is
ready.
3. Start steaming.

How to steam
Place your garment on a hanger and move the front plate against the fabric while
pressing the steam button. Do not use the steamer for more than 30 minutes
continuously. If you wish to use your steamer for more than 30 minutes, let it cool off
for one hour in between uses.

Steaming from the outside
Grab the bottom of the garment and press the steamer against the fabric.

Steaming from the inside
Place the steamer on the inside of your garment, with the front plate towards you.
Slowly move the mouthpiece against the fabric.

Use the Steaming Pad
Use the Steaming Pad to press the fabric against the steamer. This tool is great for
steaming details like collars, cuffs, pockets, and hems.

NOTE: Read the full manual before using your steamer.