1.Use the cuticle trimmer to push your cuticles back.
2 File the nail edge and top of your nail. Brush off if necessary. nail pond. Do not polish your nails after filing the top of the nail. The raw surface from the filing makes the varnish adhere better to the nail.
3.Shake the bottle with gel varnish.
4.Open the lid and stroke the brush around the bottle neck to remove Make sure that the varnish brush is free of varnish by stroking around the brush against the bottle several times. The varnish brush should have almost no varnish on it at the first application.
5.Apply a VERY THIN layer of gel over the entire surface of the nail. The first coat of gel polish must be VERY THIN! Too much varnish means that the varnish does not dry properly under the LED light or that it can easily flake off at the edge. In addition, too much varnish can feel hot during the LED light treatment.
6.Check that the lamp is switched on.
7. Place your finger in the LED lamp and press the upper button to harden your gel varnish for 30 seconds. The lamp turns off automatically when it is finished.
8.Repeat: Paint another thin layer and let it harden once more for 30 seconds under the lamp. Continue until you are done with all the nails.
9.Then you are done!