AYLIMA KORA PRO is our best wireless IPL. This is not a laser hair removal device but uses advanced IPL (Intense Pulsed Light) technology to give you smooth skin within 12 weeks. You can use our IPL for hair removal at home on any body part including face, underarms, legs and bikini. Our new sensor detects your skin tone and automatically adapts to your skin tone and optimizes the effect for a fast and safe result. (Individual results may vary). It is gentle on the skin and delivers a pleasant warm feeling in connection with the light treatment. You can choose to treat with single light pulses or with the sliding function, which takes care of this automatically for you. All so that you don't miss any skin areas you want to treat. We have also added a smart and cleansing base with UV light to kill any skin bacteria.

The package contains:
1 x AYLIMA KORA PRO IPL device
1 x Wide head
1 x Narrow head
1 x Charger
1 x Safety glasses
1 x Razor

Start-up phase: treat once a week for the first 12 weeks.
In between: hair falls out naturally and regrowth is inhibited.
Maintenance: continue with IPL as needed (eg every 1-2 months).

Technical specifications of the product:
Model: AYLIMA IPL KORA PRO
Type of light: Intense pulsed light (IPL)
Type of protection: BF type, Class 2
Protection level: IP22
Flash Counter: Unlimited for personal use
Shelf life: 5 years
Power: 36W (12V 3A)
Input voltage: 100-240V
Nominal frequency: 50/60Hz
Wavelength light: 530~1200nm
Pulse duration: 8 milliseconds
Light output window size: 3.3cm2
Treatment levels: 1–5
Dimension L*W*H: 167*63*41mm
Weight: 298g

Use:
Getting Started!

Skin sensitivity test
If this is the first time you are using the device or using it on a new body part, select a part of the skin surface you intend to treat. Select a low level such as level-1 or level-2; Give 2-3 flashes of light on the skin area and wait
then 30 minutes to check that the skin is normal. If the skin on the test part is normal, the device can be used continuously.

Your preparations
Make sure your skin surface is in good condition with no damage or sores. Remove the hair with a razor. Clean and dry the area you intend to treat. This is to ensure that the hair follicles can absorb the maximum amount of light to get the best effect.

Start treatment
1. Hold the ON/OFF/level button for 2 seconds to turn on the device. The fan inside will be active and you can hear the sound of it. The device will flash a few times.

2. Press the level button to adjust the treatment level / strength from low to high. Level 1 is the lowest and level 5 the strongest. Choose the level that is suitable for your skin and feels comfortable. Try your way between levels 1-5. Please note that the appliance is default set to start at level 1 for your safety.

3. Use AYLIMA's safety glasses when treating your skin.

4. Allow the treatment window to touch the selected body part closely and vertically. When the logo is lit, it means that the light flash button can be activated for hair removal. Press the light flash button. The device flashes and you can feel a warm sensation. Each area is treated 2-3 times for optimal effect. The light flash button is used to manually emit flashes. After finishing the treatment: Press the ON/OFF/level button for 2 seconds to turn off the device. Use a dry cloth to gently wipe the device. Connect the power cable to the socket on the holder. Connect the power cord to an electrical outlet. Place the device in the holder to clean the flash window with the germicidal lamp. The device has two operating modes. Manual flash and automatic flash. Long press the light flash button (2 seconds) to switch to auto mode. Place the treatment window against the skin, the device will then emit flashes of light automatically.

An interchangeable head is an accessory used to satisfy the needs of different hair removal areas. Install the correct head for the purpose before starting treatment with the device. 2cm2 head is adapted for face and bikini line. 1.4cm2 head is adapted for small surfaces such as fingers and toes.

Treatment schedule
AYLIMA IPL KORA PRO should be used for 12 weeks to ensure that all hair follicles are treated. Use AYLIMA IPL KORA PRO 2-3 times a week for the first month. The hair in the treated area becomes thinner, the hair color becomes lighter and the hair grows more slowly.

Use AYLIMA IPL KORA PRO 1 time per week during the second month. You will see fewer new hairs.

Use it every 15 days for the third month. The hair will have decreased. After the initial treatment phase (12 weeks), we recommend treatment once a month or as needed to maintain the results.

Maintenance and storage
Be sure to turn off and unplug AYLIMA IPL KORA PRO before cleaning. It is recommended to clean the treatment window after each session with a dry and clean cloth to gently wipe off. If dirt such as stubble and cosmetics is difficult to remove, you can dip a cotton ball or clean cloth in medical alcohol to remove it. Keep AYLIMA IPL KORA PRO dry. Never immerse the device or any of its parts in water as this may lead to an electric shock hazard. To avoid the device and its accessories being broken or missing, store the AYLIMA IPL KORA PRO and its accessories in the gift box after each use. Clean the device before storing it and store it in a safe and protective place. Otherwise, it may affect the function of the product.

Guarantee
The warranty period for AYLIMA IPL KORA PRO is one year from the date of purchase. Please contact the dealer or service personnel if there are any problems during the warranty period, repair according to the relevant warranty clause. If any operator requests more information such as circuit diagrams, spare parts list and product descriptions, for repairs carried out by qualified technical personnel, please contact us.