User images
Reviews & comments
- Most helpful positive6 monthsRating: 5 out of 5verified customer
Works very well! Exceeded expectations
I ordered this in October and have now used it long enough to see results. My skin has become smoother and the wrinkles less. On several occasions, I've been told that my skin has such a glow and that I look much younger. I am 49 years old. I use the mask about 5 times a week, 10 minutes on my face and 10 minutes on my neck + décolleté, which works fine since the mask is soft and can be bent. I weighed between this cheaper mask and one that was over twice as expensive and I'm glad I chose this one. It gets the job done!Translated from swedish
- 5 daysRating: 4 out of 5verified customer
Satisfied
I've been using the mask every day for about 2 weeks, my biggest skin challenge is acne. I think this mask helps keep my skin in check, I've noticed that I have a bit clearer skin, fewer pimples, and more glow. I'm curious if it will help with red scars with longer use.Translated from norwegian
155 viewsto leave a comment - 2 weeks
Usage
Hi. What does the recommended treatment time look like if you want to combine and use all medications, for example?Translated from swedish
498 views- Customer service at Lyko2 weeksHey Dehara! 👋 It is not recommended to run all modes in the same session, but use the mask in one mode for 10 minutes at a time 💗 Take care 🌸
to leave a comment - 2 weeks
Wavelength
How many nm is it?Translated from swedish
523 views- Customer service at Lyko2 weeksHello!🤍 Here are the exact wavelengths (nm) for the STYLPRO Wavelength LED Mask: 🔴 Red LED light: ~633 nm 🔵 Blue LED light: ~415 nm 🌌 Near-infrared light (NIR): ~830 nm lyko.com +15 stylpro.co.uk +15 stylideas.eu +15 The different light colors target specific skin goals: Red (633 nm): stimulates collagen production and combats fine lines. Blue (415 nm): has antibacterial effects to reduce pimples. Near-infrared (830 nm): soothes inflammation and supports recovery!🌞 Take care! 🍋
to leave a comment - 1 month
Rosacea
Hi! Is this good for rosacea? And which color is best then? Rosacea does cause sensitive skin, is there something one should be careful with? Thanks😊Translated from norwegian
1430 views- Customer service at Lyko1 monthHey Camilla✨ In cases of rosacea, I would stick to a mask that has yellow light🌟 Like this one: lyko.com/no/silkn/silk-n-led-face-mask This light program targets sensitive and irritated skin, and has a good effect on redness! Yellow light will, with regular use, increase the skin's ability to retain moisture - for a stronger skin barrier. I recommend that you consult with your doctor before using LED light therapy, also regarding how often you can/should use it 🥰 Wishing you a great day ahead!
to leave a comment - 2 monthsRating: 5 out of 5verified customer
Super
The skin already looks more radiant after 2 weeks. I've been using it regularly for 5 months ❤️Translated from polish
2192 viewsto leave a comment - 2 months
Wavelengths
Hey, I don't see any information about what wavelengths it has, where can I see the specifications?Translated from swedish
3603 views- Customer service at Lyko2 monthsHello there! 😊👋 Among the product images of this mask, you get lots of more information regarding the wavelengths 🙌 It ranges from 415-830 NM 🥰 Take care! ☀️
to leave a comment - 2 months
Can this be used on freshly washed faces and then apply serums and other products afterwards? What light is suitable for couperose? I read somewhere that this product is good to use in the morning, is that true?
Can this be used on freshly washed faces and then apply serums etc.?3397 views- Customer service at Lyko2 monthsHi Sini! Generally, an LED face mask should be used on clean, dry skin without makeup or thick products. Here’s a little guide: 🧼 1. Wash your face first Cleanse your skin thoroughly. The LED light works best when the skin is free from dirt, oil, and makeup. 💧 2. Light treatment essence or serum (optional) If you want, you can use a thin water-based serum that supports the effects of the LED light – for example: Moisturizing hyaluronic acid serum Antioxidant vitamin C serum Soothing niacinamide Avoid thick or oily products before treatment, as they can reduce the light's penetration into the skin. 💡 3. LED treatment Put the mask on your face and perform the treatment according to the instructions (usually 10–20 minutes). Relax! ✨ 4. After the treatment After the treatment, you can continue your skincare routine as normal – serum, moisturizer, etc. Red light: Helps improve skin elasticity and reduce redness. Blue light: Helps balance the skin's oil production and can assist in acne treatment. Have a sunny day! 🌞
to leave a comment - 3 months
Eye protection?
Hey, mine just arrived. I tried the mask on and was shocked at how brightly it dazzled my eyes despite the eye protection. My eyes completely blurred because of the brightness, is that harmful to the eyes and is it supposed to go into the eyes like that? I definitely can't use it with my eyes open. 🥲3459 views- 3 monthsHey, I tried again and the issue was fixed by improving the mask's position and attachment angle. 👌🏻 You have to be quite careful at the beginning.
to leave a comment - 3 months
which mask
I don't know which led mask I should buy... this one or the one from silkn? 😅Translated from german
3144 viewsto leave a comment - 3 months
10 or 15min?
It says to use it for 10min. Does it turn off automatically after 10min? I also got a bit confused because right below it says something about "to turn off the mask before you have completed 15 minutes, press and hold the button". Should it be used for 10 or 15min? And does it turn off automatically?Translated from norwegian
3680 views- Skin therapist at Lyko3 monthsHi Siri 👋 Here I see that the information text for products can be confusing, so I have informed the correct department so that this can be updated 🙌 The mask has modes that provide treatment for 10 minutes - and here is a timer that tells how much time is left. As soon as the treatment is over, the mask will turn off 🤗 If you want to read more about the product, this can be done on Stylepro's own website stylideas.eu/pages/faqs-stylpro-led-face-mask Wishing you a nice day ahead 👋
to leave a comment
STYLPROLED Wavelength Mask
This hands free, wearable mask harnesses the power of LED lights, with 4 different modes, to target your skincare needs. The red LED stimulates collagen production, helping to reduce the appearance of fine lines and wrinkles, while the blue LED leaves your complexion clearer. Explore the benefits of near-infrared light to help reduce inflammation. The real magic happens when the red and blue LEDs work with the near-infrared to address multiple skin concerns simultaneously.
Use:
HOW TO ASSEMBLE:
1.Remove all parts of the LED Face Mask from the packaging. This includes the controller, eye comfort pads, GREY straps, and LED Face Mask.
2.Place the eye comfort pads into the eye holes and ensure they are securely attached. See ‘R’ for right and ‘L’ for left on the eye comfort pads.
3.Attach the GREY straps into the loops at the side of the LED Face Mask. Ensure the larger end of the strap is facing upward and secure to the crown of your head.
4.Plug the wire attached to the LED Face Mask in to the top of the controller. The LED Face Mask will not work if the controller is not plugged into the mask.
CHARGING:
Insert the USB-C cable (provided) into the port at the top of the controller. Attach to a USB-C friendly power source. The battery icon will show a loading sequence when charging.
HOW TO USE:
DO NOT USE MORE THAN 3-5 TIMES PER WEEK.
1. Once your LED Face Mask is fully assembled, place the LED Face Mask onto your face and securely attach the straps around the crown of your head.
2. Long press the On/Off button on the controller. This will turn on to the ‘Anti-ageing’ mode.
3. Short press the Mode button to switch to the ‘Target’ mode.
4. Short press the Mode button to switch to the ‘Recovery’ mode.
5. Short press the Mode button to switch to the ‘Balance’ mode.
6. Once you have chosen your preferred Mode, enjoy a 10 minute treatment.
7. To turn off your LED Face Mask before you have completed your 10 minute treatment, long press the On/Off button.
CLEANING:
Wipe down the area of the mask that has come into contact with the skin with a disinfectant wipe after every use.
- Category:Beauty Tech
- Article number:3556-135-0000