SEMILACStarter Set TRY ME

Ole ensimmäinen, joka arvioi tämän tuotteet
70,12 €
Alkuperäishinta 93,50 €25
04h : 55m : 24s
Ilmainen toimitusmahdollisuus, voidaan lähettää heti.

Want to get the perfect gel nails at home like a pro? Check out Semilac’s ‘Try Me’ Set!
This ultimate gel nail set is made just for you!
This exciting set comes with a powerful UV/LED lamp with an electronic display, a motion sensor that lights up automatically when you place your hand inside, dual led technology, and low-temperature settings – just like painting your nails at a gel nail salon!

The package includes everything you need, from base to top coat and a lint-free pads.

And with one set lasting for at least 20 full manicure applications, you’ll be able to keep your nails looking great for months.

Use:

 Application of products cured under UV/LED light (e.g. UV gel polishes, gels, acrylic gels): STEP 1 - Shape the nails, mattify nail plate with a polishing block and degrease the plate with a cotton pad soaked in Semilac nail cleaner. STEP 2 - Apply a thin layer of the selected Semilac base to the entire plate, securing the free edge of the nail. Cure under the lamp. If you have a product that does not require a base, you can proceed to apply the varnish, remembering to cure each layer under the lamp. STEP 3 - Color Varnish Application (if applicable). Apply a thin coat of color lacquer, taking care to carefully protect and cure a free edge of the nail. Repeat the process until the desired effect is achieved. The curing time depends on the type of lamp used. STEP 4 - Finish the styling with top and cure under the UV/LED lamp. If you have a product that does not require a top finish, remove the sticky dispersion layer using Semilac Nail Cleaner and use Semilac Oil in the cuticle area to finish the treatment. Note: For a greater shine, some products can be polished with Semilac Nail Oil or Polishing File 4000.
Instructions for removing products cured under UV/LED lamp: STEP 1 - Soak Semilac Remover Wraps with Semilac acetone or Semilac remover liquid. Wrap each finger tightly in foil and wait approximately 10-15 minutes. If a no-wipe product (without a dispersion layer) was applied, the top layer of the manicure must first be dulled with a polishing block or file STEP 2 - Remove the softened product with a wooden stick or Semilac Pusher. At the very end, carefully smooth the surface of the nail plate with a Semilac Quality polishing block. Important: Not all UV/LED curable products are removed with liquids, e.g. build-up gels/ acrylic gels should be removed with a nail drill. Important notes: With highly pigmented varnish/gel, always remember to apply thin layers and then allow for a longer curing time . Before use, each product should be mixed well . The removal time of the manicure depends on the thickness of the applied layers of product. Never try to scrape or tear off the product. When you put your hand under the lamp make sure that the manicure is evenly illuminated - your thumbs can be a critical area.

Käyttäjäkuvat

Lataa omia kuvia

Lataa ottamasi kuva tuotteesta tai lopputuloksesta käytettyäsi tuotetta.

Arvosana & kommentit

Arvioi tuote

    Ole ensimmäinen, joka arvioi tuotteen

    VIIMEINEN TILAISUUS tehdä kauneuslöytöjä! Tik tak:

    4h 55m 24s